Novatex Products - Products

TERRANOVA

FAST SETTING HIGH ADHESION STRENGTH TILE ADHESIVE
TERRANOVA is a premium grade Fast setting, non-slip, non-slump, flexible off white tile adhesive specially designed for moisture sensitive stone.
TERRANOVA is the ultimate when it comes to tile adhesives, with its superior adhesion strength, Rapid set time and flexibility. TERRANOVA out performs its opposition in every aspect of application and cost.
TERRANOVA is fast setting allowing tiles to be trafficable after only 4 hr

High performance
Flexible
Non Slump
Fast set in 4 hrs
Adhesive-meets C2S2TE classifications
For moisture sensitive stone

TERRANOVA DS

ACA15 ADHESIVE

ACA15 offers excellent plasticizer resistance and is specially designed for installing a wide range of vinyl and acoustic floor coverings.

Pre Mixed Adhesive
Easy spread formulation
Remains permanently flexible
Quick and easy to install
Offers long term performance
Pressure sensitive

ACA15 ADHESIVE DS

ACOUSTIC UNDERLAY

Acoustic Mat is a recycled rubber granulate, bounded with a cold cure PUR. This composite is designed to ensure the ideal combination of sound absorption and resilience . This mat does not suffer from compression set which is the nemesis of many underlay materials.

Recycled Rubber
Easy installation
Remains permanently flexible
Quick and easy to install
Light weight material
Offers long term performance

ACOUSTIC UNDERLAY DS

BASE RENDER

Combining exterior cladding with superior insulation.
Insulclad Base Render is a polymer modified cement based render that is one of the components of the Insulclad exterior insulated rendered wall system. It is a specially formulated system that has enhanced adhesion and water resistance properties that combine to give the Insulclad Rendered Wall System its Supertough qualities. It provides a special bond between the polystyrene board, fibreglass reinforcing mesh and the finish renders. Refer to your supplier for the other render products that are available from the Insulclad range. Insulclad Base Render can be used as:

As a base coat render on Insulclad Core Panel polystyrene system or
As joint patching on the Insulclad Pre-Mesh Panel polystyrene system when mixed with Insulclad Joint Patch and Primer Additive.
As a base coat for blue board, Hebel, brick or block work, and other masonry substrates.

BASE RENDER DS
BASE RENDER MSDS

BONDI BLING

Enhanced Pre Mixed Modified Acrylic texture
Bondi Bling is a ready mixed, flexible, acrylic coating ideal for covering and decorating suitably prepared interior or exterior surfaces. Bondi Bling is an attractive subtle granular texture finish ideally suitable to modern construction while maintaining a traditional look. Bondi Bling is a pre blended, acrylic texture that boasts superior trowel ability and its unique formulations allows easy trowelability . Bondi Bling is available in a light tint base and dark tint base (as denoted by lid colour)

Acrylic modified
Tintable
Easy trowelability
Superior adhesion and flexibility
Modern granule texture finish

BONDI BLING DS
BONDI BLING MSDS

COARSE FLOAT

Combining exterior cladding with superior insulation.
Insulclad Coarse Float Finishing Render is a polymer modified cement based render that is one of the components of the Insulclad exterior insulated rendered wall system. It is designed as a finish coat that offers an attractive subtle granular texture ideally suited to modern construction while maintaining a traditional look. Other textures are available, refer to your supplier for the other finish renders that are available from the Insulclad range.
Insulclad Coarse Float Finishing Render can be used as:

As a finish coat render on Insulclad Core Panel polystyrene system when Insulclad Base Render is applied first or
As a finish coat render on Insulclad Pre-Mesh Panel polystyrene system.
As a finish coat for blue board, Hebel, brick or block work and other masonry substrates.

COARSE FLOAT DS
COARSE FLOAT MSDS

CRYSTAL COARSE

Crystal Coarse is a ready mixed, flexible, acrylic coating ideal for covering and decorating suitably prepared interior or exterior surfaces.

Crystal Coarse is an attractive granular texture finish ideally suitable to modern construction while maintaining a traditional look.

Crystal Coarse is a pre blended, acrylic texture that boasts superior trowel ability and its unique formulations allows easy trowelability. Crystal Coarse is specially designed with the unique BIS formulating system giving it superior mould and dirt resistance.

Acrylic modified
Built in sealer
Tintable
Easy trowelability
Superior adhesion and flexibility
Modern granule texture finish

CRYSTAL COARSE DS

ELASTO SERIES JOINT BAND

ENHANCED ELASTIC RECOVERY HIGH TENSILE BANDAGES
Novatex Elasto Joint Band, Elasto Pre - fabricated corners and Elasto pipe collars are designed for use as waterproofing system bond breakers and sealers around pipes and penetrations. Novatex Elasto series Joint Band, Pre - fabricated Corners and Pipe collar s enhanced elastic recovery and high tensile strength properties protect the seal against substrate or force generated movement during the life of the waterproofing system.

Can be used in both internal and external applications
Specific design giving exceptional elongation properties
Solvent free, non-hazardous
Elasto corners and collars are Pre-Fabricated for easy use

ELASTO SERIES JOINT BAND DS

ER100

FAST CURING PRE BLENDED POLYMER MODIFIED CEMENT BASED RENDER
ER 100 is a multipurpose, acrylic render that boasts superior Strength.
ER 100 unique formulation allows it to be applied up to 10mm with no sagging or cracking. ER 100 can be used by using a hawk and trowel over a variety of surfaces including AAC blocks, AFS, brick work, fibre cement sheeting, concrete and polystyrene board (contact your nearest Novatex office for correct application).

Acrylic modified
Superior setting strength
Fast curing
Build up to 10mm in single application
Unique PFR Technology

ER100 DS
ER100 MSDS

EZ101

Enhanced Pre Blended Modified Cement Based Render
EZ101 is a multipurpose, acrylic render that boasts superior trowelability.
EZ 101 unique formulation allows it to be applied up to 12mm with no sagging or cracking. EZ 101 can be used either through a pump or by using a hawk and trowel over a variety of surfaces including AAC blocks, AFS, brickwork, fibre cement sheeting, concrete and polystyrene board ( contact your nearest Novatex office for correct application).

Acrylic modified
Easy flow formulation for pumping
Easy trowelability
Build up to 12mm in single application
Unique PFR Technology

EZ101 DS
EZ101 MSDS

FINE SKIM

Combining exterior cladding with superior insulation.
Insulclad Fine Skim Finishing Render is a polymer modified cement based render that is one of the components of the Insulclad exterior insulated rendered wall system. It is designed as a finish coat that affers an attractive fine subtle granular texture ideally suited to modern construction while maintaining a traditional look. Other textures are available, refer to your supplier for the other finish renders that are available from the Insulclad range.
Insulclad Fine Skim Finishing Render can be used as:

As a finish coat render on Insulclad Core Panel polystyrene system when Insulclad Base Render is applied first or
As a finish coat render on Insulclad Pre-Mesh Panel polystyrene system.
As a finish coat for blue board, Hebel, brick or block work and other masonry substrates.

FINE SKIM DS
FINE SKIM MSDS

FLEX N PATCH

Enhanced Pre Mixed Modified Acrylic texture
Flex N Patch is a ready mixed, flexible, acrylic coating ideal for patching and setting joints where flexibility is essential or covering and decorating suitably prepared interior or exterior surfaces. Flex N Patch is an attractive fine granular texture finish ideally suitable to modern construction while maintaining a traditional look. Flex N Patch is a pre blended, acrylic texture that boasts superior trowel ability . Flex N Patch is non shrink making it ideal when filling or patching in joints.

Acrylic modified
Non Shrink
Easy trowelability
Superior adhesion and flexibility
Modern fine granule texture finish

FLEX N PATCH DS
FLEX N PATCH MSDS

FORZA FC 50

One Part Elastic Polyurethane Fast Cure A dhesive/Sealant
Forza FC 50 is a high performance, fast cure dual purpose adhesive and sealing compound with permanent elasticity. It bonds well to a wide variety of substrates and enables permanent elastic sealing with high adhesive strength between most common metals, painted surfaces, GRP, PVC and other rigid plastics.

One-component polyurethane
Permanently flexible and stable
Bonds and seals at the same time
Non sag consistency
Fast drying
Acrylic modified

FORZA FC 50 DS

FORZA MS 20

One Part Elastic Sealant
Forza MS 20 is a one - part MS Polymer permanently elastic construction sealant. It is a low modulus sealant with excellent adhesive properties and resistance to ageing and weathering. Suitable for sealing of expansion and construction joints in vertical and horizontal applications. Unique Non - shrink formulation.

Good adhesion on all typical construction materials
Paintable
No bubble formation. Odourless
Permanently elastic over a wide range of temperatures
Accommodates joint movement +/- 25%
Easy to gun, easy to tool
Excellent resistance to ageing and weathering

FORZA MS 20 DS

FORZA SIL 10

ANTI MOULD SLICONE
FORZA SIL 10 is a superior acetoxy silicone with an amazing resistance to mould growth. It is the ideal silicone sealant to use in all wet areas including bathrooms, laundries and kitchens.
FORZA SIL 10 with its unique formulation boasts excellent resistance to U V, weathering, water, low and high temperatures .

Mould resistant
Easy to gun, easy to tool
excellent adhesion and flexibility
Excellent resistance to ageing and weathering

FORZA SIL 10 DS

FORZA SIL COLORE

MOULD RESISTANT COLOURED SLICONE
FORZA SIL COLORE is a neutral cured silicone with resistance to mould growth. It is the ideal silicone sealant to use in all wet areas including bathrooms, laundries and kitchens.
FORZA SIL COLORE with its unique formulation boasts excellent resistance to UV, weathering, water, low and high temperatures .

Mould resistant
Easy to gun, easy to tool
excellent adhesion and flexibility
Excellent resistance to ageing and weathering

FORZA SIL COLORE DS

HI BUILD

UNIQUE LIGHT WEIGHT HI BUILD RENDER
Hi Build Lo Weight is a light weight, acrylic modified cement render that boasts ability to build up 40mm thickness with superior trowel ability.
Hi Build Lo Weight has been designed to build up and level undulating surfaces. Suitable to be applied over brick work, AAC blocks, blue board (Fibre cement sheet) concrete, polystyrene surfaces and specified light weight building substrates

Unique light weight technology
Ability to be built up to 40mm
Superior Adhesion
Ideal for light weight building substrates

HI BUILD LO WEIGHT DS
HI BUILD LO WEIGHT MSDS

HYDRO PRIME

EPOXY PRIMER AND MOISTURE BARRIER
Hydro Prime is a two component water based epoxy compound used as both a primer and moisture barrier.

Hydro Prime is specially designed to prevent rising damp through cement and concrete surfaces.

Hydro prime can be applied onto damp surfaces and over freshly laid concrete (green concrete), screeds and renders with excellent resistance to hydrostatic pressure.

Two component system
Excellent resistance to hydrostatic pressure.
Commercial and residential work
Able to be applied to damp surfaces.
Easy water clean up

HYDRO PRIME DS

LEVELR

LEVELR is an internal and external levelling system specially formulated for the preparation of concrete floors prior to the laying of floor coverings. What makes LEVELR so unique are the specially selected cements and polymers that produce a fast setting underlayment with exceptional adhesion to most flooring materials and the ability to be used internally or externally.

High performance
Internal and External Use
Self-smoothing
Feather edge to 50mm
Underlay
Fast setting due to specifically selected cements and polymers
Superior Adhesion to Concrete Surfaces
Pumpable

LEVELR DS
LEVELR MSDS

MEDIUM FLOAT

Combining exterior cladding with superior insulation.
Insulclad Medium Float Finishing Render is a polymer modified cement based render that is one of the components of the Insulclad exterior insulated rendered wall system. It is designed as a finish coat that offers an attractive subtle granular texture ideally suited to modern construction while maintaining a traditional look. Other textures are available, refer to your supplier for the other finish renders that are available from the Insulclad range.
Insulclad Medium Float Finishing Render can be used as:

As a finish coat render on Insulclad Core Panel polystyrene system when Insulclad Base Render is applied first or
As a finish coat render on Insulclad Pre-Mesh Panel polystyrene system.
As a finish coat for blue board, Hebel, brick or block work and other masonry substrates.

MEDIUM FLOAT DS
MEDIUM FLOAT MSDS

NOVAEZY

NON SLIP WHITE FLEXIBLE ONE PART ADHESIVE
NOVAEZY is a smooth white, polymer modified Flexible non slip tile adhesive. It is designed for bonding a large range of tiles. Suitable for wall and floor applications for internal use.

Commercial Grade
Smooth White
Flexible
Non Slump
Extended Open Time
Adhesive-meets C2S1TE classifications

NOVAEZY DS
NOVAEZY MSDS
NOVAEZY VOC

NOVAFIX

CEMENT BASED TILE ADHESIVE
NOVAFIX is an off white cement based tile adhesive which uses the unique PFR technology .
What makes NOVAFIX so special is that with the incorporation of PFR technology, NOVAFIX has superior shear and compression strengths.

High performance
Superior impact strength
Extended Open Time
Adhesive-meets C1E classifications

NOVAFIX DS
NOVAFIX MSDS

NOVAFLEX

HIGH GRADE NON SLUMP FLEXIBLE TILE ADHESIVE
NOVAFLEX is non - slump, rubber modified, off white cement based tile adhesive with specially formulated PFR technology designed to give superior shear strength.
What makes Novaflex so unique is that it will accommodate shrinkage movement associated with early age concrete and screeds. It can be used over concrete that is at least 7 days old and on screeds and renders after 16 hours. It is flexible enough to with stand crack openings of up to 0.9mm.

High performance
Flexible, Non Slump
Extended Open Time
Adhesive meets C2S1TE classifications

NOVAFLEX DS
NOVAFLEX MSDS
NOVAFLEX VOC

NOVAFLEX PLUS

PREMIUM GRADE NON SLUMP FLEXIBLE TILE ADHESIVE
NOVAFLEX PLUS is non - slump, rubber modified, off white cement based tile adhesive with specially formulated PFR technology designed to give superior shear strength. What makes Novaflex Plus so unique is that it will accommodate shrinkage movement associated with early age concrete and screeds. It can be used over concrete that is at least 7 days old and screeds and renders after 16 hours. It is flexible enough to withstand crack openings of up to 0.9mm.

High performance
Flexible
Non Slump
Extended Open Time
Adhesive-meets C2S1TE classifications
Superior Coverage
Ideal product for commercial applications e.g. shopping centres

NOVAFLEX PLUS DS
NOVAFLEX PLUS MSDS
NOVAFLEX PLUS VOC

NOVAFLEX PLUS 2 PART

PREMIUM GRADE 2 PART
NOVAFLEX PLUS 2 PART is a two component non - slump, rubber modified, off white cement based tile adhesive with specially formulated PFR technology designed to give superior shear strength and flexibility.
What makes NOVAFLEX PLUS 2 PART so unique is that it is designed to be used where flexibility is critical. It will accommodate shrinkage movement associated with early age concrete and screeds. It can be used over concrete that is at least 7 days old and screeds or renders after 16 hours . It is flexible enough to be used for tiling over timber or acoustic mat.

High performance
Flexible, Non Slump
Extended Open Time
Adhesive-meets C2S2TE classifications

NOVAFLEX PLUS 2 PART DS

NOVAGROUT EPOXY

NovaGrout Epoxy is a three part, commercial grade water clean-up epoxy system. Its uniquely designed with the colour being in the liquid component.

For internal and external wall and floor applications
Tough, high mechanical strength
Chemical resistant
Non shrink
For use in joints from 1.2mm to 6mm
Specially designed formula makes NovaGrout easy to clean off tiles with water

NOVAGROUT EPOXY DS
NOVAGROUT MSDS

NOVAGROUT SANDED

MOULD RESISTANT
Nova Grout Sanded is a polymer modified cement based grout specially designed for internal and external wall and floor applications. It is designed for use with ceramic tiles, marble, porcelain, vitrified, stone and mosaic tiles.
Designed for grouting over a large range of floor and wall tiles.

For internal and external for wall and floor applications.
Mould resistant.
Non shrink grout.
For use in joints from 3mm to 12mm.
Specially designed formula makes Nova Grout easy to clean off tiles.

NOVAGROUT SANDED DS
NOVAGROUT MSDS

NOVAGROUT SMOOTH

MOULD RESISTANT
Nova Grout Smooth is a Polymer modified cement based grout specially designed for internal & external wall and floor applications.
It is designed for use with ceramic tiles, marble, porcelain, vitrified, stone and mosaic tiles. Designed for grouting over a large range of floor and wall tiles.

For internal and external wall and floor applications.
Mould resistant.
For use in swimming pools and water immersed areas.
Non shrink grout.
For use in joints from 1.5mm to 4mm.
Specially designed formula makes Nova Grout easy to clean off tiles.

NOVAGROUT SMOOTH DS
NOVAGROUT MSDS

NOVAMAGIC

NON SLUMP WHITE COMMERCIAL GRADE
NOVA MAGIC is non - slump, white, cement based tile adhesive specially designed for large format tiles.
Nova Magic with its light weight technology has been specially designed to give superior coverage together with its great non slump capability makes Nova Magic the most cost effective white tile adhesive on the market.

Commercial Grade
White
Flexible
Non Slump
Extended Open Time
Adhesive-meets C2S1TE classifications
Ideal product for commercial applications e.g. shopping centres, home units and project homes.

NOVAMAGIC DS
NOVAMAGIC MSDS

NOVAMASTIC

NON SLUMP WHITE COMMERCIAL GRADE
NOVA MASTIC is non - slump, white, cement based tile adhesive specially designed for large format tiles.
What makes Nova Mastic so unique is that it will not slump with tiles on the wall or the floor. Nova Mastic accommodates shrinkage movement associated with early age concrete and screeds.

Commercial Grade
Flexible, Non Slump
Extended Open Time
Adhesive-meets C2S1TE classifications

NOVAMASTIC DS
NOVAMASTIC MSDS
NOVAMASTIC VOC

NOVAMIX ADDITIVE

SPECIALLY DESIGNED ACRYLIC POLYMER ADDITIVE
Nova Mix Additive an acrylic polymer additive specifically formulated to be mixed with Novatex cement based renders and adhesives to increase strength and flexibility.
Nova Mix Additive can be mixed with Novatex Grouts when grouting over substrate prone to movement e.g. timber floors.

High polymer content giving it the capability to increase adhesion
Unique formula allowing it to be mixed with any Novatex cement based product
When mixed with Nova grout allows grout to be used as adhesive

NOVAMIX ADDITIVE DS
NOVAMIX ADDITIVE MSDS

NOVAPRIME

SPECIALLY FORMULATED ACRYLIC BASED PRIMER
Nova Prime is an acrylic based wall and floor primer for use on all porous surfaces before applying Novatex Tile Adhesives , Waterproofing Membranes and Renders.
NovaPrime will improve workability and open time of Novatex Adhesives , Waterproofing and Renders.

Non tacky under feet once applied
Clear drying

NOVAPRIME DS
NOVAPRIME MSDS

NOVAPROOF 2 PART

2 PART WATERPROOFING MEMBRANE
Nova Proof – 2 Part is a fast drying two component waterproof membrane that is suitable for the wide range of waterproofing applications.
Based in unique cross linking polymer technology, Nova Proof 2 P art displays outstanding adhesion properties over numerous building substrates.

Handles ponding and permanently wet conditions, will not re-emulsify
Flexible with good elongation properties
Can be applied on vertical and horizontal surfaces
Excellent non-sag properties
Solvent free, non-hazardous

NOVAPROOF 2 PART DS

NOVAPROOF EXTERNAL

UV STABLE TRAFICABLE WATERPROOFING MEMBRANE
Novaproof External is a hard wearing membrane designed for external applications. Novaproof External is fast curing, allowing second coat to be applied after 1 - 2hrs depending on conditions.
Novaproof External is suitable for use as a trafficable top - coat over Novaproof 2 Part and Novaproof PFR membrane .

Novaproof External exhibits superior adhesion
Excellent UV weather resistance.
Non-shrinking, flexible
Foot trafficable, provides non-slip surface, no sand broadcasts required
Resistant to fungi and algae growth
Superior weathering properties and ponding
Water resistant
Superior adhesion to surfaces.

NOVAPROOF EXTERNAL DS

NOVAPROOF FR

NovaProof FR is a polyurethane modified, fibre reinforced, flexible waterproofing membrane.
NovaProof FR is a class III membrane and conforms to AS/NZS 4858 ‘wet area membranes’
NovaProof FR is a one - part light grey pre mixed product that does not require mixing

Fast curing
Used for internal and external applications.
Commercial and residential work
Can be used in shower recesses, bathrooms, laundries and external verandahs.
Can be used over a large range of surfaces

NOVAPROOF FR DS
NOVAPROOF FR MSDS

NOVAPROOF PU 815

POLYURETHENE WATERPROOFING MEMBRANE
NovaProof PU 815 is a polyurethane, highly elastic waterproofing membrane.

NovaProof PU 815 conforms to AS/NZS 4858:2004 ‘wet area membranes as a class III membrane.

NovaProof PU 815 is a one-part light grey pre mixed product that does not require mixing.

Fast curing
Used for internal and external applications.
Commercial and residential work
Superior strength.
Can be used over a large range of surfaces

NOVAPROOF PU DS

NOVARAPID

Nova Rapid is a Calcium Chloride based liquid designed to make any cement based product set and develop initial strength fast.
Nova Rapid is specially designed for the use with Novatex Tile adhesives, grouts and renders
Nova Rapid is recommended for use where fast setting results are required .

NOVARAPID DS
NOVATEX NOVARAPID MSDS

OPTIMUS PRIMER

PRIMER FOR ENHANCING ADHESIONS
Optimus Non - Porous Primer is a unique solvent free primer specifically designed with adhesion enhancing properties for use onto metallic, smooth, dense and non - porous surfaces. Optimus Non - Porous Primer is a safe alternative to hazardous solvent based primers and etching products, to enable the adhesion of Novatex renders, adhesives and waterproofing membranes over non - absorbent surfaces.

Solvent free, non-flammable and free of hazardous odours
Suitable for internal and external priming applications
Fast drying
Excellent water resistance
Easy alternative to grinding and etching surfaces
Ideal for Dincel walls

OPTIMUS PRIMER DS
OPITMUS PRIMER MSDS

SCRATCH AND DRAG

For internal and external wall and floor applications.
Mould resistant.
For use in swimming pools and water immersed areas.
Non shrink grout.
For use in joints from 1.5mm to 4mm.
Specially designed formula makes Nova Grout easy to clean off tiles.

SCRATCH AND DRAG DS
SCRATCH AND DRAG MSDS

SOLARTITE

Enhanced Water based Membrane exterior Paint
Solartite is a ready mixed, flexible, acrylic coating ideal for covering and decorating suitably prepared interior or exterior surfaces. Solartite is a pre blended, membrane paint that will ensure a newly rendered wall will remain water tight and in like new condition, as well as adding a sense of style to your wall with a diverse selection of modern colours available. Solartite is available in a light tint base and dark tint base (as denoted by lid colour)

Acrylic modified
Tintable
Easy flow formulation
Superior adhesion and flexibility
Breathable

SOLARTITE DS
SOLARTITE MSDS

SPR ACRYLIC

SMOOTH POLYMER RENDER
SPR ACRYLIC is a multipurpose, acrylic render.

SPR Acrylic unique formulation boasts superior trowelability while giving it a smooth finish. It can be applied up to 10mm with no sagging or cracking. SPR Acrylic can be applied by using a hawk and trowel over a variety of surfaces including AAC blocks, brickwork, concrete walls and concrete blockwork.

Acrylic modified
Easy trowelability
creamy
Build up to 10mm in single application
Smooth render finish

COARSE FLOAT DS

SUPANOVA

SUPER GRADE POLYMER MODIFIED TILE ADHESIVE
SUPANOVA is an off white cement based tile adhesive with specially formulated FR technology designed to give superior shear strength.

What makes SUPANOVA so special is that with the unique FR technology used gives SUPANOVA superior shear and compression strength making it ideal for use for driveways where heavy vehicle traffic is to be used.

High performance
Superior impact strength
Extended Open Time
Adhesive-meets C1E classifications

SUPANOVA DS
SUPANOVA MSDS
SUPANOVA VOC

TINT N PRIME

Tint N Prime is a high performance, acrylic tintable primer. It is specially designed to seal and prime all clean masonry surfaces while providing excellent adhesion. Tint N Prime is specially formulated to allow colours to be reproduced with economical tint additions.

Excellent adhesion
Tintable
Superior coverage
Good hiding power
Easy spreadability

TINT N PRIME DS

UNINOVA

SUPERIOR GRADE ONE PART FLEXIBLE TILE ADHESIVE
UNI NOVA is a premium grade non slip, non slump, flexible white tile adhesive designed to withstand movement in substrates .
Uni Nova is the ultimate when it comes to tile adhesives, with its superior adhesion strength and flexibility. With its unique PFR light weight formulation , Uni Nova out performs its opposition in every aspect of application and cost. Whether you need to tile directly on to timber floors or inside a swimming pool Uni Nova is the ultimate choice when only the best will do.

High performance
Flexible
Non Slump
Extended Open Time
Adhesive-meets C2S2TE classifications
Light Weight

UNINOVA DS
UNINOVA MSDS

Subcategories