Combining exterior cladding with superior insulation.
Insulclad Base Render is a polymer modified cement based render that is one of the components of the Insulclad exterior insulated rendered wall system. It is a specially formulated system that has enhanced adhesion and water resistance properties that combine to give the Insulclad Rendered Wall System its Supertough qualities. It provides a special bond between the polystyrene board, fibreglass reinforcing mesh and the finish renders. Refer to your supplier for the other render products that are available from the Insulclad range. Insulclad Base Render can be used as:

• As a base coat render on Insulclad Core Panel polystyrene system or
• As joint patching on the Insulclad Pre-Mesh Panel polystyrene system when mixed with Insulclad Joint Patch and Primer Additive.
• As a base coat for blue board, Hebel, brick or block work, and other masonry substrates.

BASE RENDER DS
BASE RENDER MSDS

FAST CURING PRE BLENDED POLYMER MODIFIED CEMENT BASED RENDER
ER 100 is a multipurpose, acrylic render that boasts superior Strength.
ER 100 unique formulation allows it to be applied up to 10mm with no sagging or cracking. ER 100 can be used by using a hawk and trowel over a variety of surfaces including AAC blocks, AFS, brick work, fibre cement sheeting, concrete and polystyrene board (contact your nearest Novatex office for correct application).

• Acrylic modified
• Superior setting strength
• Fast curing
• Build up to 10mm in single application
• Unique PFR Technology

ER100 DS
ER100 MSDS

Enhanced Pre Blended Modified Cement Based Render
EZ101 is a multipurpose, acrylic render that boasts superior trowelability.
EZ 101 unique formulation allows it to be applied up to 12mm with no sagging or cracking. EZ 101 can be used either through a pump or by using a hawk and trowel over a variety of surfaces including AAC blocks, AFS, brickwork, fibre cement sheeting, concrete and polystyrene board ( contact your nearest Novatex office for correct application).

• Acrylic modified
• Easy flow formulation for pumping
• Easy trowelability
• Build up to 12mm in single application
• Unique PFR Technology

EZ101 DS
EZ101 MSDS

UNIQUE LIGHT WEIGHT HI BUILD RENDER
Hi Build Lo Weight is a light weight, acrylic modified cement render that boasts ability to build up 40mm thickness with superior trowel ability.
Hi Build Lo Weight has been designed to build up and level undulating surfaces. Suitable to be applied over brick work, AAC blocks, blue board (Fibre cement sheet) concrete, polystyrene surfaces and specified light weight building substrates

• Unique light weight technology
• Ability to be built up to 40mm
• Superior Adhesion
• Ideal for light weight building substrates

HI BUILD LO WEIGHT DS
HI BUILD LO WEIGHT MSDS

Combining exterior cladding with superior insulation.
Insulclad Coarse Float Finishing Render is a polymer modified cement based render that is one of the components of the Insulclad exterior insulated rendered wall system. It is designed as a finish coat that offers an attractive subtle granular texture ideally suited to modern construction while maintaining a traditional look. Other textures are available, refer to your supplier for the other finish renders that are available from the Insulclad range.
Insulclad Coarse Float Finishing Render can be used as:

• As a finish coat render on Insulclad Core Panel polystyrene system when Insulclad Base Render is applied first or
• As a finish coat render on Insulclad Pre-Mesh Panel polystyrene system.
• As a finish coat for blue board, Hebel, brick or block work and other masonry substrates.

COARSE FLOAT DS
COARSE FLOAT MSDS

Combining exterior cladding with superior insulation.
Insulclad Fine Skim Finishing Render is a polymer modified cement based render that is one of the components of the Insulclad exterior insulated rendered wall system. It is designed as a finish coat that affers an attractive fine subtle granular texture ideally suited to modern construction while maintaining a traditional look. Other textures are available, refer to your supplier for the other finish renders that are available from the Insulclad range.
Insulclad Fine Skim Finishing Render can be used as:

• As a finish coat render on Insulclad Core Panel polystyrene system when Insulclad Base Render is applied first or
• As a finish coat render on Insulclad Pre-Mesh Panel polystyrene system.
• As a finish coat for blue board, Hebel, brick or block work and other masonry substrates.

FINE SKIM DS
FINE SKIM MSDS

Combining exterior cladding with superior insulation.
Insulclad Medium Float Finishing Render is a polymer modified cement based render that is one of the components of the Insulclad exterior insulated rendered wall system. It is designed as a finish coat that offers an attractive subtle granular texture ideally suited to modern construction while maintaining a traditional look. Other textures are available, refer to your supplier for the other finish renders that are available from the Insulclad range.
Insulclad Medium Float Finishing Render can be used as:

• As a finish coat render on Insulclad Core Panel polystyrene system when Insulclad Base Render is applied first or
• As a finish coat render on Insulclad Pre-Mesh Panel polystyrene system.
• As a finish coat for blue board, Hebel, brick or block work and other masonry substrates.

MEDIUM FLOAT DS
MEDIUM FLOAT MSDS

• For internal and external wall and floor applications.
• Mould resistant.
• For use in swimming pools and water immersed areas.
• Non shrink grout.
• For use in joints from 1.5mm to 4mm.
• Specially designed formula makes Nova Grout easy to clean off tiles.

SCRATCH AND DRAG DS
SCRATCH AND DRAG MSDS

SMOOTH POLYMER RENDER
SPR ACRYLIC is a multipurpose, acrylic render.

SPR Acrylic unique formulation boasts superior trowelability while giving it a smooth finish. It can be applied up to 10mm with no sagging or cracking. SPR Acrylic can be applied by using a hawk and trowel over a variety of surfaces including AAC blocks, brickwork, concrete walls and concrete blockwork.

• Acrylic modified
• Easy trowelability
• creamy
• Build up to 10mm in single application
• Smooth render finish

COARSE FLOAT DS

Enhanced Water based Membrane exterior Paint
Solartite is a ready mixed, flexible, acrylic coating ideal for covering and decorating suitably prepared interior or exterior surfaces. Solartite is a pre blended, membrane paint that will ensure a newly rendered wall will remain water tight and in like new condition, as well as adding a sense of style to your wall with a diverse selection of modern colours available. Solartite is available in a light tint base and dark tint base (as denoted by lid colour)

• Acrylic modified
• Tintable
• Easy flow formulation
• Superior adhesion and flexibility
• Breathable

SOLARTITE DS
SOLARTITE MSDS

Tint N Prime is a high performance, acrylic tintable primer. It is specially designed to seal and prime all clean masonry surfaces while providing excellent adhesion. Tint N Prime is specially formulated to allow colours to be reproduced with economical tint additions.

• Excellent adhesion
• Tintable
• Superior coverage
• Good hiding power
• Easy spreadability

TINT N PRIME DS

Enhanced Pre Mixed Modified Acrylic texture
Bondi Bling is a ready mixed, flexible, acrylic coating ideal for covering and decorating suitably prepared interior or exterior surfaces. Bondi Bling is an attractive subtle granular texture finish ideally suitable to modern construction while maintaining a traditional look. Bondi Bling is a pre blended, acrylic texture that boasts superior trowel ability and its unique formulations allows easy trowelability . Bondi Bling is available in a light tint base and dark tint base (as denoted by lid colour)

• Acrylic modified
• Tintable
• Easy trowelability
• Superior adhesion and flexibility
• Modern granule texture finish

BONDI BLING DS
BONDI BLING MSDS

Crystal Coarse is a ready mixed, flexible, acrylic coating ideal for covering and decorating suitably prepared interior or exterior surfaces.

Crystal Coarse is an attractive granular texture finish ideally suitable to modern construction while maintaining a traditional look.

Crystal Coarse is a pre blended, acrylic texture that boasts superior trowel ability and its unique formulations allows easy trowelability. Crystal Coarse is specially designed with the unique BIS formulating system giving it superior mould and dirt resistance.

• Acrylic modified
• Built in sealer
• Tintable
• Easy trowelability
• Superior adhesion and flexibility
• Modern granule texture finish

CRYSTAL COARSE DS

Enhanced Pre Mixed Modified Acrylic texture
Flex N Patch is a ready mixed, flexible, acrylic coating ideal for patching and setting joints where flexibility is essential or covering and decorating suitably prepared interior or exterior surfaces. Flex N Patch is an attractive fine granular texture finish ideally suitable to modern construction while maintaining a traditional look. Flex N Patch is a pre blended, acrylic texture that boasts superior trowel ability . Flex N Patch is non shrink making it ideal when filling or patching in joints.

• Acrylic modified
• Non Shrink
• Easy trowelability
• Superior adhesion and flexibility
• Modern fine granule texture finish

FLEX N PATCH DS
FLEX N PATCH MSDS